program main

!*****************************************************************************80
!
!! MAIN is the main program for TRIANGULATION_ORIENT.
!
!  Discussion:
!
!    TRIANGULATION_ORIENT forces a triangulation to have positive orientation.
!
!    The user supplies a node file and a triangle file, containing
!    the coordinates of the nodes, and the indices of the nodes that
!    make up each triangle.  Either 3-node or 6-node triangles may
!    be used.
!
!    The program reads the data, and for each triangle, determines
!    whether the triangle has positive orientation.  This essentially
!    means that the vertices are listed in counter clockwise order.
!    If the vertices are listed in the wrong order, they are reordered.
!    The reordered triangle file is written out.
!
!    Note that for an order 6 triangulation, the vertices are listed
!    in the first three positions.
!
!  Usage:
!
!    triangulation_orient prefix
!
!    where 'prefix' is the common filename prefix:
!
!    * prefix_nodes.txt contains the node coordinates,
!    * prefix_elements.txt contains the element definitions.
!    * prefix_orient_elements.txt will contain the oriented element definitions.
!
!  Licensing:
!
!    This code is distributed under the MIT license. 
!
!  Modified:
!
!    03 October 2009
!
!  Author:
!
!    John Burkardt
!
  implicit none

  integer, parameter :: rk = kind ( 1.0D+00 )

  real ( kind = rk ) area
  integer arg_num
  integer dim_num
  integer i
  integer iarg
  integer iargc
  character ( len = 255 ) :: node_filename = ' '
  character ( len = 255 ) :: element_filename = ' '
  integer j
  integer node
  integer node_num
  real ( kind = rk ), allocatable, dimension ( :, : ) :: node_xy
  character ( len = 255 ) :: element_orient_filename = ' '
  character ( len = 255 ) prefix
  real ( kind = rk ) t3(2,3)
  integer triangle
  integer triangle_negative_num
  integer, allocatable, dimension ( :, : ) :: triangle_node
  integer triangle_num
  integer triangle_order
  integer triangle_zero_num

  call timestamp ( )

  write ( *, '(a)' ) ' '
  write ( *, '(a)' ) 'TRIANGULATION_ORIENT'
  write ( *, '(a)' ) '  FORTRAN90 version'
  write ( *, '(a)' ) '  Read a node dataset of NODE_NUM points in 2 dimensions.'
  write ( *, '(a)' ) '  Read an associated triangle file of TRIANGLE_NUM '
  write ( *, '(a)' ) '  triangles using 3 or 6 nodes.'
  write ( *, '(a)' ) ' '
  write ( *, '(a)' ) '  Ensure that every triangle has positive orientation.'
  write ( *, '(a)' ) ' '
  write ( *, '(a)' ) '  Write the reoriented triangle file.'
!
!  Get the number of command line arguments.
!
  arg_num = iargc ( )
!
!  Argument 1 is the common filename prefix.
!
  if ( 1 <= arg_num ) then

    iarg = 1
    call getarg ( iarg, prefix )

  else

    write ( *, '(a)' ) ' '
    write ( *, '(a)' ) 'TRIANGULATION_ORIENT:'
    write ( *, '(a)' ) '  Please enter the filename prefix.'

    read ( *, '(a)' ) prefix

  end if
!
!  Create the filenames.
!
  node_filename = trim ( prefix ) // '_nodes.txt'
  element_filename = trim ( prefix ) // '_elements.txt'
  element_orient_filename = trim ( prefix ) // '_orient_elements.txt'
!
!  Read the node data.
!
  call r8mat_header_read (  node_filename, dim_num, node_num )

  write ( *, '(a)' ) ' '
  write ( *, '(a)' ) '  Read the header of "' &
    // trim ( node_filename ) //'".'
  write ( *, '(a)' ) ' '
  write ( *, '(a,i8)' ) '  Spatial dimension DIM_NUM = ', dim_num
  write ( *, '(a,i8)' ) '  Number of nodes NODE_NUM  = ', node_num

  allocate ( node_xy(1:dim_num,1:node_num) )

  call r8mat_data_read ( node_filename, dim_num, node_num, node_xy )

  write ( *, '(a)' ) ' '
  write ( *, '(a)' ) '  Read the data in "' &
    // trim ( node_filename ) //'".'

  call r8mat_transpose_print_some ( dim_num, node_num, node_xy, 1, 1, &
    dim_num, 5, '  First 5 nodes:' )
!
!  Read the element data.
!
  call i4mat_header_read ( element_filename, triangle_order, &
    triangle_num )

  write ( *, '(a)' ) ' '
  write ( *, '(a)' ) '  Read the header of "' &
    // trim ( element_filename ) //'".'
  write ( *, '(a)' ) ' '
  write ( *, '(a,i8)' ) '  Triangle order TRIANGLE_ORDER = ', triangle_order
  write ( *, '(a,i8)' ) '  Number of triangles TRIANGLE_NUM  = ', triangle_num

  if ( triangle_order /= 3 .and. triangle_order /= 6 ) then
    write ( *, '(a)' ) ' '
    write ( *, '(a)' ) 'TRIANGULATION_ORIENT - Fatal error!'
    write ( *, '(a)' ) '  This program can only handle triangulations'
    write ( *, '(a)' ) '  of orders 3 and 6.'
    write ( *, '(a)' ) ' '
    write ( *, '(a)' ) '  The input triangulation seems to have'
    write ( *, '(a,i8)' ) '  order = ', triangle_order
    stop
  end if

  allocate ( triangle_node(1:triangle_order,1:triangle_num) )

  call i4mat_data_read ( element_filename, triangle_order, &
    triangle_num, triangle_node )

  write ( *, '(a)' ) ' '
  write ( *, '(a)' ) '  Read the data in "' &
    // trim ( element_filename ) //'".'

  call i4mat_transpose_print_some ( triangle_order, triangle_num, &
    triangle_node, 1, 1, triangle_order, 5, '  First 5 triangles:' )
!
!  Detect and correct 0-based indexing.
!
  call mesh_base_one ( node_num, triangle_order, triangle_num, triangle_node )
!
!  Compute the area, and reorient if necessary.
!
  triangle_negative_num = 0
  triangle_zero_num = 0

  do triangle = 1, triangle_num

    t3(1:2,1:3) = node_xy(1:2,triangle_node(1:3,triangle))

    call triangle_area_2d ( t3, area )

    if ( area < 0.0D+00 ) then

      triangle_negative_num = triangle_negative_num + 1

      node                      = triangle_node(2,triangle)
      triangle_node(2,triangle) = triangle_node(3,triangle)
      triangle_node(3,triangle) = node

      if ( triangle_order == 6 ) then
        node                      = triangle_node(4,triangle)
        triangle_node(4,triangle) = triangle_node(6,triangle)
        triangle_node(6,triangle) = node
      end if
!
!  As a check, repeat the area calculation.
!  Now, we expect to get a positive result.
!
      t3(1:2,1:3) = node_xy(1:2,triangle_node(1:3,triangle))
  
      call triangle_area_2d ( t3, area )

      if ( area < 0.0D+00 ) then
        write ( *, '(a)' ) ' '
        write ( *, '(a)' ) 'TRIANGULATION_ORIENT - Fatal error!'
        write ( *, '(a)' ) '  I thought I fixed the area but I did not!'
        stop
      end if

    else if ( area == 0.0D+00 ) then

      triangle_zero_num = triangle_zero_num + 1

    end if

  end do

  if ( 0 < triangle_zero_num ) then
    write ( *, '(a)' ) ' '
    write ( *, '(a)' ) 'TRIANGULATION_ORIENT - Warning!'
    write ( *, '(a,i8,a)' ) '  You have ', triangle_zero_num, ' triangles with'
    write ( *, '(a)' ) '  area equal to zero.'
  end if

  if ( 0 < triangle_negative_num ) then

    call i4mat_write ( element_orient_filename, triangle_order, &
      triangle_num, triangle_node )

    write ( *, '(a)' ) ' '
    write ( *, '(a)' ) 'TRIANGULATION_ORIENT - Warning!'
    write ( *, '(a,i8,a)' ) '  You have ', triangle_negative_num, &
      ' triangles with'
    write ( *, '(a)' ) '  negative area.'
    write ( *, '(a)' ) ' '
    write ( *, '(a)' ) '  We have reoriented these triangles to have positive'
    write ( *, '(a)' ) '  area, and written the new triangle data to '
    write ( *, '(a)' ) '  the triangle file "' &
      // trim ( element_orient_filename ) //'".'
    
    call i4mat_transpose_print_some ( triangle_order, triangle_num, &
      triangle_node, 1, 1, triangle_order, 5, '  First 5 triangles:' )

  else

    write ( *, '(a)' ) ' '
    write ( *, '(a)' ) 'TRIANGULATION_ORIENT:'
    write ( *, '(a)' ) '  None of your triangles had negative area.'
    write ( *, '(a)' ) '  Therefore, no new triangle file was written.'

  end if
!
!  Free memory.
!
  deallocate ( node_xy )
  deallocate ( triangle_node )
!
!  Terminate.
!
  write ( *, '(a)' ) ' '
  write ( *, '(a)' ) 'TRIANGULATION_ORIENT'
  write ( *, '(a)' ) '  Normal end of execution.'

  write ( *, '(a)' ) ' '
  call timestamp ( )

  stop
end
subroutine ch_cap ( c )

!*****************************************************************************80
!
!! CH_CAP capitalizes a single character.
!
!  Licensing:
!
!    This code is distributed under the MIT license. 
!
!  Modified:
!
!    19 July 1998
!
!  Author:
!
!    John Burkardt
!
!  Parameters:
!
!    Input/output, character C, the character to capitalize.
!
  implicit none

  character c
  integer itemp

  itemp = ichar ( c )

  if ( 97 <= itemp .and. itemp <= 122 ) then
    c = char ( itemp - 32 )
  end if

  return
end
function ch_eqi ( c1, c2 )

!*****************************************************************************80
!
!! CH_EQI is a case insensitive comparison of two characters for equality.
!
!  Example:
!
!    CH_EQI ( 'A', 'a' ) is .TRUE.
!
!  Licensing:
!
!    This code is distributed under the MIT license. 
!
!  Modified:
!
!    28 July 2000
!
!  Author:
!
!    John Burkardt
!
!  Parameters:
!
!    Input, character C1, C2, the characters to compare.
!
!    Output, logical CH_EQI, the result of the comparison.
!
  implicit none

  logical ch_eqi
  character c1
  character c1_cap
  character c2
  character c2_cap

  c1_cap = c1
  c2_cap = c2

  call ch_cap ( c1_cap )
  call ch_cap ( c2_cap )

  if ( c1_cap == c2_cap ) then
    ch_eqi = .true.
  else
    ch_eqi = .false.
  end if

  return
end
subroutine ch_to_digit ( c, digit )

!*****************************************************************************80
!
!! CH_TO_DIGIT returns the value of a base 10 digit.
!
!  Example:
!
!     C   DIGIT
!    ---  -----
!    '0'    0
!    '1'    1
!    ...  ...
!    '9'    9
!    ' '    0
!    'X'   -1
!
!  Licensing:
!
!    This code is distributed under the MIT license. 
!
!  Modified:
!
!    04 August 1999
!
!  Author:
!
!    John Burkardt
!
!  Parameters:
!
!    Input, character C, the decimal digit, '0' through '9' or blank
!    are legal.
!
!    Output, integer DIGIT, the corresponding value.  
!    If C was 'illegal', then DIGIT is -1.
!
  implicit none

  character c
  integer digit

  if ( lge ( c, '0' ) .and. lle ( c, '9' ) ) then

    digit = ichar ( c ) - 48

  else if ( c == ' ' ) then

    digit = 0

  else

    digit = -1

  end if

  return
end
subroutine file_column_count ( input_filename, column_num )

!*****************************************************************************80
!
!! FILE_COLUMN_COUNT counts the number of columns in the first line of a file.
!
!  Discussion:
!
!    The file is assumed to be a simple text file.
!
!    Most lines of the file is presumed to consist of COLUMN_NUM words,
!    separated by spaces.  There may also be some blank lines, and some 
!    comment lines,
!    which have a "#" in column 1.
!
!    The routine tries to find the first non-comment non-blank line and
!    counts the number of words in that line.
!
!    If all lines are blanks or comments, it goes back and tries to analyze
!    a comment line.
!
!  Licensing:
!
!    This code is distributed under the MIT license. 
!
!  Modified:
!
!    21 June 2001
!
!  Author:
!
!    John Burkardt
!
!  Parameters:
!
!    Input, character ( len = * ) INPUT_FILENAME, the name of the file.
!
!    Output, integer COLUMN_NUM, the number of columns in the file.
!
  implicit none

  integer column_num
  logical got_one
  character ( len = * ) input_filename
  integer input_unit
  integer ios
  character ( len = 255 ) line
!
!  Open the file.
!
  call get_unit ( input_unit )

  open ( unit = input_unit, file = input_filename, status = 'old', &
    form = 'formatted', access = 'sequential', iostat = ios )

  if ( ios /= 0 ) then
    column_num = -1
    write ( *, '(a)' ) ' '
    write ( *, '(a)' ) 'FILE_COLUMN_COUNT - Fatal error!'
    write ( *, '(a)' ) '  Could not open the file:'
    write ( *, '(a)' ) '    ' // trim ( input_filename )
    return
  end if
!
!  Read one line, but skip blank lines and comment lines.
!
  got_one = .false.

  do

    read ( input_unit, '(a)', iostat = ios ) line

    if ( ios /= 0 ) then
      exit
    end if

    if ( len_trim ( line ) == 0 ) then
      cycle
    end if

    if ( line(1:1) == '#' ) then
      cycle
    end if

    got_one = .true.
    exit

  end do

  if ( .not. got_one ) then

    rewind ( input_unit )

    do

      read ( input_unit, '(a)', iostat = ios ) line

      if ( ios /= 0 ) then
        exit
      end if

      if ( len_trim ( line ) == 0 ) then
        cycle
      end if

      got_one = .true.
      exit

    end do

  end if

  close ( unit = input_unit )

  if ( .not. got_one ) then
    write ( *, '(a)' ) ' '
    write ( *, '(a)' ) 'FILE_COLUMN_COUNT - Warning!'
    write ( *, '(a)' ) '  The file does not seem to contain any data.'
    column_num = -1
    return
  end if

  call s_word_count ( line, column_num )

  return
end
subroutine file_row_count ( input_filename, row_num )

!*****************************************************************************80
!
!! FILE_ROW_COUNT counts the number of row records in a file.
!
!  Discussion
!
!    It does not count lines that are blank, or that begin with a
!    comment symbol '#'.
!
!  Licensing:
!
!    This code is distributed under the MIT license. 
!
!  Modified:
!
!    06 March 2003
!
!  Author:
!
!    John Burkardt
!
!  Parameters:
!
!    Input, character ( len = * ) INPUT_FILENAME, the name of the input file.
!
!    Output, integer ROW_NUM, the number of rows found.
!
  implicit none

  integer bad_num
  integer comment_num
  integer ierror
  character ( len = * ) input_filename
  integer input_unit
  integer ios
  character ( len = 255 ) line
  integer record_num
  integer row_num

  call get_unit ( input_unit )

  open ( unit = input_unit, file = input_filename, status = 'old', &
    iostat = ios )

  if ( ios /= 0 ) then
    row_num = -1;
    ierror = 1
    write ( *, '(a)' ) ' '
    write ( *, '(a)' ) 'FILE_ROW_COUNT - Fatal error!'
    write ( *, '(a)' ) '  Could not open the input file: ' // &
      trim ( input_filename )
    stop
  end if

  comment_num = 0
  row_num = 0
  record_num = 0
  bad_num = 0

  do

    read ( input_unit, '(a)', iostat = ios ) line

    if ( ios /= 0 ) then
      ierror = record_num
      exit
    end if

    record_num = record_num + 1

    if ( line(1:1) == '#' ) then
      comment_num = comment_num + 1
      cycle
    end if

    if ( len_trim ( line ) == 0 ) then
      comment_num = comment_num + 1
      cycle
    end if

    row_num = row_num + 1

  end do

  close ( unit = input_unit )

  return
end
subroutine get_unit ( iunit )

!*****************************************************************************80
!
!! GET_UNIT returns a free FORTRAN unit number.
!
!  Discussion:
!
!    A "free" FORTRAN unit number is an integer between 1 and 99 which
!    is not currently associated with an I/O device.  A free FORTRAN unit
!    number is needed in order to open a file with the OPEN command.
!
!    If IUNIT = 0, then no free FORTRAN unit could be found, although
!    all 99 units were checked (except for units 5, 6 and 9, which
!    are commonly reserved for console I/O).
!
!    Otherwise, IUNIT is an integer between 1 and 99, representing a
!    free FORTRAN unit.  Note that GET_UNIT assumes that units 5 and 6
!    are special, and will never return those values.
!
!  Licensing:
!
!    This code is distributed under the MIT license. 
!
!  Modified:
!
!    18 September 2005
!
!  Author:
!
!    John Burkardt
!
!  Parameters:
!
!    Output, integer IUNIT, the free unit number.
!
  implicit none

  integer i
  integer ios
  integer iunit
  logical lopen

  iunit = 0

  do i = 1, 99

    if ( i /= 5 .and. i /= 6 .and. i /= 9 ) then

      inquire ( unit = i, opened = lopen, iostat = ios )

      if ( ios == 0 ) then
        if ( .not. lopen ) then
          iunit = i
          return
        end if
      end if

    end if

  end do

  return
end
subroutine i4mat_data_read ( input_filename, m, n, table )

!*****************************************************************************80
!
!! I4MAT_DATA_READ reads data from an I4MAT file.
!
!  Discussion:
!
!    The file may contain more than N points, but this routine
!    will return after reading N points.
!
!  Licensing:
!
!    This code is distributed under the MIT license.
!
!  Modified:
!
!    27 January 2005
!
!  Author:
!
!    John Burkardt
!
!  Parameters:
!
!    Input, character ( len = * ) INPUT_FILENAME, the name of the input file.
!
!    Input, integer M, the spatial dimension.
!
!    Input, integer N, the number of points.
!
!    Output, integer TABLE(M,N), the table data.
!
  implicit none

  integer m
  integer n

  integer ierror
  character ( len = * ) input_filename
  integer input_status
  integer input_unit
  integer j
  character ( len = 255 ) line
  integer table(m,n)
  integer x(m)

  ierror = 0

  call get_unit ( input_unit )

  open ( unit = input_unit, file = input_filename, status = 'old', &
    iostat = input_status )

  if ( input_status /= 0 ) then
    ierror = 1
    write ( *, '(a)' ) ' '
    write ( *, '(a)' ) 'I4MAT_DATA_READ - Fatal error!'
    write ( *, '(a,i8)' ) '  Could not open the input file "' // &
      trim ( input_filename ) // '" on unit ', input_unit
    stop
  end if

  j = 0

  do while ( j < n )

    read ( input_unit, '(a)', iostat = input_status ) line

    if ( input_status /= 0 ) then
      ierror = 2
      write ( *, '(a)' ) ' '
      write ( *, '(a)' ) 'I4MAT_DATA_READ - Fatal error!'
      write ( *, '(a)' ) '  Error while reading lines of data.'
      write ( *, '(a,i8)' ) '  Number of values expected per line M = ', m
      write ( *, '(a,i8)' ) '  Number of data lines read, J =         ', j
      write ( *, '(a,i8)' ) '  Number of data lines needed, N =       ', n
      stop
    end if

    if ( line(1:1) == '#' .or. len_trim ( line ) == 0 ) then
      cycle
    end if

    call s_to_i4vec ( line, m, x, ierror )

    if ( ierror /= 0 ) then
      cycle
    end if

    j = j + 1

    table(1:m,j) = x(1:m)

  end do

  close ( unit = input_unit )

  return
end
subroutine i4mat_header_read ( input_filename, m, n )

!*****************************************************************************80
!
!! I4MAT_HEADER_READ reads the header from an I4MAT.
!
!  Licensing:
!
!    This code is distributed under the MIT license.
!
!  Modified:
!
!    04 June 2004
!
!  Author:
!
!    John Burkardt
!
!  Parameters:
!
!    Input, character ( len = * ) INPUT_FILENAME, the name of the input file.
!
!    Output, integer M, spatial dimension.
!
!    Output, integer N, the number of points.
!
  implicit none

  character ( len = * ) input_filename
  integer m
  integer n

  call file_column_count ( input_filename, m )

  if ( m <= 0 ) then
    write ( *, '(a)' ) ' '
    write ( *, '(a)' ) 'I4MAT_HEADER_READ - Fatal error!'
    write ( *, '(a)' ) '  There was some kind of I/O problem while trying'
    write ( *, '(a)' ) '  to count the number of data columns in'
    write ( *, '(a)' ) '  the file "' // trim ( input_filename ) // '".'
    stop
  end if

  call file_row_count ( input_filename, n )

  if ( n <= 0 ) then
    write ( *, '(a)' ) ' '
    write ( *, '(a)' ) 'I4MAT_HEADER_READ - Fatal error!'
    write ( *, '(a)' ) '  There was some kind of I/O problem while trying'
    write ( *, '(a)' ) '  to count the number of data rows in'
    write ( *, '(a)' ) '  the file "' // trim ( input_filename ) // '".'
    stop
  end if

  return
end
subroutine i4mat_transpose_print_some ( m, n, a, ilo, jlo, ihi, jhi, title )

!*****************************************************************************80
!
!! I4MAT_TRANSPOSE_PRINT_SOME prints some of the transpose of an I4MAT.
!
!  Licensing:
!
!    This code is distributed under the MIT license. 
!
!  Modified:
!
!    09 February 2005
!
!  Author:
!
!    John Burkardt
!
!  Parameters:
!
!    Input, integer M, N, the number of rows and columns.
!
!    Input, integer A(M,N), an M by N matrix to be printed.
!
!    Input, integer ILO, JLO, the first row and column to print.
!
!    Input, integer IHI, JHI, the last row and column to print.
!
!    Input, character ( len = * ) TITLE, a title.
!
  implicit none

  integer, parameter :: incx = 10
  integer m
  integer n

  integer a(m,n)
  character ( len = 7 ) ctemp(incx)
  integer i
  integer i2
  integer i2hi
  integer i2lo
  integer ihi
  integer ilo
  integer inc
  integer j
  integer j2hi
  integer j2lo
  integer jhi
  integer jlo
  character ( len = * ) title

  write ( *, '(a)' ) ' '
  write ( *, '(a)' ) trim ( title )

  do i2lo = max ( ilo, 1 ), min ( ihi, m ), incx

    i2hi = i2lo + incx - 1
    i2hi = min ( i2hi, m )
    i2hi = min ( i2hi, ihi )

    inc = i2hi + 1 - i2lo

    write ( *, '(a)' ) ' '

    do i = i2lo, i2hi
      i2 = i + 1 - i2lo
      write ( ctemp(i2), '(i7)') i
    end do

    write ( *, '(''  Row '',10a7)' ) ctemp(1:inc)
    write ( *, '(a)' ) '  Col'
    write ( *, '(a)' ) ' '

    j2lo = max ( jlo, 1 )
    j2hi = min ( jhi, n )

    do j = j2lo, j2hi

      do i2 = 1, inc

        i = i2lo - 1 + i2

        write ( ctemp(i2), '(i7)' ) a(i,j)

      end do

      write ( *, '(i5,1x,10a7)' ) j, ( ctemp(i), i = 1, inc )

    end do

  end do

  return
end
subroutine i4mat_write ( output_filename, m, n, table )

!*****************************************************************************80
!
!! I4MAT_WRITE writes an I4MAT file.
!
!  Licensing:
!
!    This code is distributed under the MIT license.
!
!  Modified:
!
!    31 May 2009
!
!  Author:
!
!    John Burkardt
!
!  Parameters:
!
!    Input, character ( len = * ) OUTPUT_FILENAME, the output file name.
!
!    Input, integer M, the spatial dimension.
!
!    Input, integer N, the number of points.
!
!    Input, integer TABLE(M,N), the table data.
!
  implicit none

  integer m
  integer n

  integer j
  character ( len = * ) output_filename
  integer output_status
  integer output_unit
  character ( len = 30 ) string
  integer table(m,n)
!
!  Open the file.
!
  call get_unit ( output_unit )

  open ( unit = output_unit, file = output_filename, &
    status = 'replace', iostat = output_status )

  if ( output_status /= 0 ) then
    write ( *, '(a)' ) ' '
    write ( *, '(a)' ) 'I4MAT_WRITE - Fatal error!'
    write ( *, '(a,i8)' ) '  Could not open the output file "' // &
      trim ( output_filename ) // '" on unit ', output_unit
    output_unit = -1
    stop
  end if
!
!  Create a format string.
!
  write ( string, '(a1,i8,a4)' ) '(', m, 'i10)'
!
!  Write the data.
!
  do j = 1, n
    write ( output_unit, string ) table(1:m,j)
  end do
!
!  Close the file.
!
  close ( unit = output_unit )

  return
end
subroutine mesh_base_one ( node_num, element_order, element_num, element_node )

!*****************************************************************************80
!
!! MESH_BASE_ONE ensures that the element definition is one-based.
!
!  Discussion:
!
!    The ELEMENT_NODE array contains nodes indices that form elements.
!    The convention for node indexing might start at 0 or at 1.
!    Since a FORTRAN90 program will naturally assume a 1-based indexing, it is
!    necessary to check a given element definition and, if it is actually
!    0-based, to convert it.
!
!    This function attempts to detect 9-based node indexing and correct it.
!
!  Licensing:
!
!    This code is distributed under the MIT license. 
!
!  Modified:
!
!    02 October 2009
!
!  Author:
!
!    John Burkardt
!
!  Parameters:
!
!    Input, int NODE_NUM, the number of nodes.
!
!    Input, int ELEMENT_ORDER, the order of the elements.
!
!    Input, int ELEMENT_NUM, the number of elements.
!
!    Input/output, int ELEMENT_NODE(ELEMENT_ORDER,ELEMENT_NUM), the element
!    definitions.
!
  implicit none

  integer element_num
  integer element_order

  integer element
  integer element_node(element_order,element_num)
  integer node
  integer node_max
  integer node_min
  integer node_num
  integer order

  node_min = node_num + 1
  node_max = -1

  node_min = minval ( element_node(1:element_order,1:element_num) )
  node_max = maxval ( element_node(1:element_order,1:element_num) )

  if ( node_min == 0 .and. node_max == node_num - 1 ) then
    write ( *, '(a)' ) ' '
    write ( *, '(a)' )'MESH_BASE_ONE:'
    write ( *, '(a)' )'  The element indexing appears to be 0-based!'
    write ( *, '(a)' )'  This will be converted to 1-based.'
    element_node(1:element_order,1:element_num) = &
      element_node(1:element_order,1:element_num) + 1
  else if ( node_min == 1 .and. node_max == node_num  ) then
    write ( *, '(a)' ) ' '
    write ( *, '(a)' )'MESH_BASE_ONE:'
    write ( *, '(a)' )'  The element indexing appears to be 1-based!'
    write ( *, '(a)' )'  No conversion is necessary.'
  else
    write ( *, '(a)' ) ' '
    write ( *, '(a)' ) 'MESH_BASE_ONE - Warning!'
    write ( *, '(a)' ) '  The element indexing is not of a recognized type.'
    write ( *, '(a,i8)' ) '  NODE_MIN = ', node_min
    write ( *, '(a,i8)' ) '  NODE_MAX = ', node_max
    write ( *, '(a,i8)' ) '  NODE_NUM = ', node_num
  end if

  return
end
subroutine r8mat_data_read ( input_filename, m, n, table )

!*****************************************************************************80
!
!! R8MAT_DATA_READ reads data from an R8MAT file.
!
!  Discussion:
!
!    The file may contain more than N points, but this routine will
!    return after reading N of them.
!
!  Licensing:
!
!    This code is distributed under the MIT license.
!
!  Modified:
!
!    18 October 2008
!
!  Author:
!
!    John Burkardt
!
!  Parameters:
!
!    Input, character ( len = * ) INPUT_FILENAME, the name of the input file.
!
!    Input, integer M, the spatial dimension.
!
!    Input, integer N, the number of points.
!
!    Output, real ( kind = rk ) TABLE(M,N), the table data.
!
  implicit none

  integer, parameter :: rk = kind ( 1.0D+00 )

  integer m
  integer n

  integer ierror
  character ( len = * ) input_filename
  integer input_status
  integer input_unit
  integer j
  character ( len = 255 ) line
  real ( kind = rk ) table(m,n)
  real ( kind = rk ) x(m)

  ierror = 0

  call get_unit ( input_unit )

  open ( unit = input_unit, file = input_filename, status = 'old', &
    iostat = input_status )

  if ( input_status /= 0 ) then
    ierror = 1
    write ( *, '(a)' ) ' '
    write ( *, '(a)' ) 'R8MAT_DATA_READ - Fatal error!'
    write ( *, '(a,i8)' ) '  Could not open the input file "' // &
      trim ( input_filename ) // '" on unit ', input_unit
    stop
  end if

  j = 0

  do while ( j < n )

    read ( input_unit, '(a)', iostat = input_status ) line

    if ( input_status /= 0 ) then
      write ( *, '(a)' ) ' '
      write ( *, '(a)' ) 'R8MAT_DATA_READ - Fatal error!'
      write ( *, '(a)' ) '  Error while reading lines of data.'
      write ( *, '(a,i8)' ) '  Number of values expected per line M = ', m
      write ( *, '(a,i8)' ) '  Number of data lines read, J =         ', j
      write ( *, '(a,i8)' ) '  Number of data lines needed, N =       ', n
      stop
    end if

    if ( line(1:1) == '#' .or. len_trim ( line ) == 0 ) then
      cycle
    end if

    call s_to_r8vec ( line, m, x, ierror )

    if ( ierror /= 0 ) then
      cycle
    end if

    j = j + 1

    table(1:m,j) = x(1:m)

  end do

  close ( unit = input_unit )

  return
end
subroutine r8mat_header_read ( input_filename, m, n )

!*****************************************************************************80
!
!! R8MAT_HEADER_READ reads the header from an R8MAT file.
!
!  Licensing:
!
!    This code is distributed under the MIT license.
!
!  Modified:
!
!    07 September 2004
!
!  Author:
!
!    John Burkardt
!
!  Parameters:
!
!    Input, character ( len = * ) INPUT_FILENAME, the name of the input file.
!
!    Output, integer M, spatial dimension.
!
!    Output, integer N, the number of points.
!
  implicit none

  character ( len = * ) input_filename
  integer m
  integer n

  call file_column_count ( input_filename, m )

  if ( m <= 0 ) then
    write ( *, '(a)' ) ' '
    write ( *, '(a)' ) 'R8MAT_HEADER_READ - Fatal error!'
    write ( *, '(a)' ) '  There was some kind of I/O problem while trying'
    write ( *, '(a)' ) '  to count the number of data columns in'
    write ( *, '(a)' ) '  the file "' // trim ( input_filename ) // '".'
    stop
  end if

  call file_row_count ( input_filename, n )

  if ( n <= 0 ) then
    write ( *, '(a)' ) ' '
    write ( *, '(a)' ) 'R8MAT_HEADER_READ - Fatal error!'
    write ( *, '(a)' ) '  There was some kind of I/O problem while trying'
    write ( *, '(a)' ) '  to count the number of data rows in'
    write ( *, '(a)' ) '  the file "' // trim ( input_filename ) // '".'
    stop
  end if

  return
end
subroutine r8mat_transpose_print_some ( m, n, a, ilo, jlo, ihi, jhi, title )

!*****************************************************************************80
!
!! R8MAT_TRANSPOSE_PRINT_SOME prints some of a R8MAT, transposed.
!
!  Licensing:
!
!    This code is distributed under the MIT license. 
!
!  Modified:
!
!    14 June 2004
!
!  Author:
!
!    John Burkardt
!
!  Parameters:
!
!    Input, integer M, N, the number of rows and columns.
!
!    Input, real ( kind = rk ) A(M,N), an M by N matrix to be printed.
!
!    Input, integer ILO, JLO, the first row and column to print.
!
!    Input, integer IHI, JHI, the last row and column to print.
!
!    Input, character ( len = * ) TITLE, an optional title.
!
  implicit none

  integer, parameter :: rk = kind ( 1.0D+00 )

  integer, parameter :: incx = 5
  integer m
  integer n

  real ( kind = rk ) a(m,n)
  character ( len = 14 ) ctemp(incx)
  integer i
  integer i2
  integer i2hi
  integer i2lo
  integer ihi
  integer ilo
  integer inc
  integer j
  integer j2hi
  integer j2lo
  integer jhi
  integer jlo
  character ( len = * ) title

  write ( *, '(a)' ) ' '
  write ( *, '(a)' ) trim ( title )

  do i2lo = max ( ilo, 1 ), min ( ihi, m ), incx

    i2hi = i2lo + incx - 1
    i2hi = min ( i2hi, m )
    i2hi = min ( i2hi, ihi )

    inc = i2hi + 1 - i2lo

    write ( *, '(a)' ) ' '

    do i = i2lo, i2hi
      i2 = i + 1 - i2lo
      write ( ctemp(i2), '(i7,7x)') i
    end do

    write ( *, '(''  Row   '',5a14)' ) ctemp(1:inc)
    write ( *, '(a)' ) '  Col'
    write ( *, '(a)' ) ' '

    j2lo = max ( jlo, 1 )
    j2hi = min ( jhi, n )

    do j = j2lo, j2hi

      do i2 = 1, inc
        i = i2lo - 1 + i2
        write ( ctemp(i2), '(g14.6)' ) a(i,j)
      end do

      write ( *, '(i5,1x,5a14)' ) j, ( ctemp(i), i = 1, inc )

    end do

  end do

  return
end
subroutine s_to_i4 ( s, ival, ierror, length )

!*****************************************************************************80
!
!! S_TO_I4 reads an I4 from a string.
!
!  Licensing:
!
!    This code is distributed under the MIT license. 
!
!  Modified:
!
!    28 June 2000
!
!  Author:
!
!    John Burkardt
!
!  Parameters:
!
!    Input, character ( len = * ) S, a string to be examined.
!
!    Output, integer IVAL, the value read from the string.
!    If the string is blank, then IVAL will be returned 0.
!
!    Output, integer IERROR, an error flag.
!    0, no error.
!    1, an error occurred.
!
!    Output, integer LENGTH, the number of characters of S used.
!
  implicit none

  character c
  integer i
  integer ierror
  integer isgn
  integer istate
  integer ival
  integer length
  character ( len = * ) s

  ierror = 0
  istate = 0
  isgn = 1
  ival = 0

  do i = 1, len_trim ( s )

    c = s(i:i)
!
!  Haven't read anything.
!
    if ( istate == 0 ) then

      if ( c == ' ' ) then

      else if ( c == '-' ) then
        istate = 1
        isgn = -1
      else if ( c == '+' ) then
        istate = 1
        isgn = + 1
      else if ( lle ( '0', c ) .and. lle ( c, '9' ) ) then
        istate = 2
        ival = ichar ( c ) - ichar ( '0' )
      else
        ierror = 1
        return
      end if
!
!  Have read the sign, expecting digits.
!
    else if ( istate == 1 ) then

      if ( c == ' ' ) then

      else if ( lle ( '0', c ) .and. lle ( c, '9' ) ) then
        istate = 2
        ival = ichar ( c ) - ichar ( '0' )
      else
        ierror = 1
        return
      end if
!
!  Have read at least one digit, expecting more.
!
    else if ( istate == 2 ) then

      if ( lle ( '0', c ) .and. lle ( c, '9' ) ) then
        ival = 10 * ival + ichar ( c ) - ichar ( '0' )
      else
        ival = isgn * ival
        length = i - 1
        return
      end if

    end if

  end do
!
!  If we read all the characters in the string, see if we're OK.
!
  if ( istate == 2 ) then
    ival = isgn * ival
    length = len_trim ( s )
  else
    ierror = 1
    length = 0
  end if

  return
end
subroutine s_to_i4vec ( s, n, ivec, ierror )

!*****************************************************************************80
!
!! S_TO_I4VEC reads an I4VEC from a string.
!
!  Licensing:
!
!    This code is distributed under the MIT license. 
!
!  Modified:
!
!    08 October 2003
!
!  Author:
!
!    John Burkardt
!
!  Parameters:
!
!    Input, character ( len = * ) S, the string to be read.
!
!    Input, integer N, the number of values expected.
!
!    Output, integer IVEC(N), the values read from the string.
!
!    Output, integer IERROR, error flag.
!    0, no errors occurred.
!    -K, could not read data for entries -K through N.
!
  implicit none

  integer n

  integer i
  integer ierror
  integer ilo
  integer ivec(n)
  integer length
  character ( len = * ) s

  i = 0
  ierror = 0
  ilo = 1

  do while ( i < n )

    i = i + 1

    call s_to_i4 ( s(ilo:), ivec(i), ierror, length )

    if ( ierror /= 0 ) then
      ierror = -i
      exit
    end if

    ilo = ilo + length

  end do

  return
end
subroutine s_to_r8 ( s, dval, ierror, length )

!*****************************************************************************80
!
!! S_TO_R8 reads an R8 from a string.
!
!  Discussion:
!
!    The routine will read as many characters as possible until it reaches
!    the end of the string, or encounters a character which cannot be
!    part of the number.
!
!    Legal input is:
!
!       1 blanks,
!       2 '+' or '-' sign,
!       2.5 blanks
!       3 integer part,
!       4 decimal point,
!       5 fraction part,
!       6 'E' or 'e' or 'D' or 'd', exponent marker,
!       7 exponent sign,
!       8 exponent integer part,
!       9 exponent decimal point,
!      10 exponent fraction part,
!      11 blanks,
!      12 final comma or semicolon,
!
!    with most quantities optional.
!
!  Example:
!
!    S                 DVAL
!
!    '1'               1.0
!    '     1   '       1.0
!    '1A'              1.0
!    '12,34,56'        12.0
!    '  34 7'          34.0
!    '-1E2ABCD'        -100.0
!    '-1X2ABCD'        -1.0
!    ' 2E-1'           0.2
!    '23.45'           23.45
!    '-4.2E+2'         -420.0
!    '17d2'            1700.0
!    '-14e-2'         -0.14
!    'e2'              100.0
!    '-12.73e-9.23'   -12.73 * 10.0^(-9.23)
!
!  Licensing:
!
!    This code is distributed under the MIT license. 
!
!  Modified:
!
!    07 September 2004
!
!  Author:
!
!    John Burkardt
!
!  Parameters:
!
!    Input, character ( len = * ) S, the string containing the
!    data to be read.  Reading will begin at position 1 and
!    terminate at the end of the string, or when no more
!    characters can be read to form a legal real.  Blanks,
!    commas, or other nonnumeric data will, in particular,
!    cause the conversion to halt.
!
!    Output, real ( kind = rk ) DVAL, the value read from the string.
!
!    Output, integer IERROR, error flag.
!    0, no errors occurred.
!    1, 2, 6 or 7, the input number was garbled.  The
!    value of IERROR is the last type of input successfully
!    read.  For instance, 1 means initial blanks, 2 means
!    a plus or minus sign, and so on.
!
!    Output, integer LENGTH, the number of characters read
!    to form the number, including any terminating
!    characters such as a trailing comma or blanks.
!
  implicit none

  integer, parameter :: rk = kind ( 1.0D+00 )

  logical ch_eqi
  character c
  real ( kind = rk ) dval
  integer ierror
  integer ihave
  integer isgn
  integer iterm
  integer jbot
  integer jsgn
  integer jtop
  integer length
  integer nchar
  integer ndig
  real ( kind = rk ) rbot
  real ( kind = rk ) rexp
  real ( kind = rk ) rtop
  character ( len = * ) s

  nchar = len_trim ( s )

  ierror = 0
  dval = 0.0D+00
  length = -1
  isgn = 1
  rtop = 0
  rbot = 1
  jsgn = 1
  jtop = 0
  jbot = 1
  ihave = 1
  iterm = 0

  do

    length = length + 1

    if ( nchar < length+1 ) then
      exit
    end if

    c = s(length+1:length+1)
!
!  Blank character.
!
    if ( c == ' ' ) then

      if ( ihave == 2 ) then

      else if ( ihave == 6 .or. ihave == 7 ) then
        iterm = 1
      else if ( 1 < ihave ) then
        ihave = 11
      end if
!
!  Comma.
!
    else if ( c == ',' .or. c == ';' ) then

      if ( ihave /= 1 ) then
        iterm = 1
        ihave = 12
        length = length + 1
      end if
!
!  Minus sign.
!
    else if ( c == '-' ) then

      if ( ihave == 1 ) then
        ihave = 2
        isgn = -1
      else if ( ihave == 6 ) then
        ihave = 7
        jsgn = -1
      else
        iterm = 1
      end if
!
!  Plus sign.
!
    else if ( c == '+' ) then

      if ( ihave == 1 ) then
        ihave = 2
      else if ( ihave == 6 ) then
        ihave = 7
      else
        iterm = 1
      end if
!
!  Decimal point.
!
    else if ( c == '.' ) then

      if ( ihave < 4 ) then
        ihave = 4
      else if ( 6 <= ihave .and. ihave <= 8 ) then
        ihave = 9
      else
        iterm = 1
      end if
!
!  Scientific notation exponent marker.
!
    else if ( ch_eqi ( c, 'E' ) .or. ch_eqi ( c, 'D' ) ) then

      if ( ihave < 6 ) then
        ihave = 6
      else
        iterm = 1
      end if
!
!  Digit.
!
    else if (  ihave < 11 .and. lle ( '0', c ) .and. lle ( c, '9' ) ) then

      if ( ihave <= 2 ) then
        ihave = 3
      else if ( ihave == 4 ) then
        ihave = 5
      else if ( ihave == 6 .or. ihave == 7 ) then
        ihave = 8
      else if ( ihave == 9 ) then
        ihave = 10
      end if

      call ch_to_digit ( c, ndig )

      if ( ihave == 3 ) then
        rtop = 10.0D+00 * rtop + real ( ndig, kind = rk )
      else if ( ihave == 5 ) then
        rtop = 10.0D+00 * rtop + real ( ndig, kind = rk )
        rbot = 10.0D+00 * rbot
      else if ( ihave == 8 ) then
        jtop = 10 * jtop + ndig
      else if ( ihave == 10 ) then
        jtop = 10 * jtop + ndig
        jbot = 10 * jbot
      end if
!
!  Anything else is regarded as a terminator.
!
    else
      iterm = 1
    end if
!
!  If we haven't seen a terminator, and we haven't examined the
!  entire string, go get the next character.
!
    if ( iterm == 1 ) then
      exit
    end if

  end do
!
!  If we haven't seen a terminator, and we have examined the
!  entire string, then we're done, and LENGTH is equal to NCHAR.
!
  if ( iterm /= 1 .and. length+1 == nchar ) then
    length = nchar
  end if
!
!  Number seems to have terminated.  Have we got a legal number?
!  Not if we terminated in states 1, 2, 6 or 7!
!
  if ( ihave == 1 .or. ihave == 2 .or. ihave == 6 .or. ihave == 7 ) then
    ierror = ihave
    write ( *, '(a)' ) ' '
    write ( *, '(a)' ) 'S_TO_R8 - Serious error!'
    write ( *, '(a)' ) '  Illegal or nonnumeric input:'
    write ( *, '(a)' ) '    ' // trim ( s )
    return
  end if
!
!  Number seems OK.  Form it.
!
  if ( jtop == 0 ) then
    rexp = 1.0D+00
  else
    if ( jbot == 1 ) then
      rexp = 10.0D+00 ** ( jsgn * jtop )
    else
      rexp = 10.0D+00 ** ( real ( jsgn * jtop, kind = rk ) &
        / real ( jbot, kind = rk ) )
    end if
  end if

  dval = real ( isgn, kind = rk ) * rexp * rtop / rbot

  return
end
subroutine s_to_r8vec ( s, n, rvec, ierror )

!*****************************************************************************80
!
!! S_TO_R8VEC reads an R8VEC from a string.
!
!  Licensing:
!
!    This code is distributed under the MIT license. 
!
!  Modified:
!
!    07 September 2004
!
!  Author:
!
!    John Burkardt
!
!  Parameters:
!
!    Input, character ( len = * ) S, the string to be read.
!
!    Input, integer N, the number of values expected.
!
!    Output, real ( kind = rk ) RVEC(N), the values read from the string.
!
!    Output, integer IERROR, error flag.
!    0, no errors occurred.
!    -K, could not read data for entries -K through N.
!
  implicit none

  integer, parameter :: rk = kind ( 1.0D+00 )

  integer n

  integer i
  integer ierror
  integer ilo
  integer lchar
  real ( kind = rk ) rvec(n)
  character ( len = * ) s

  i = 0
  ierror = 0
  ilo = 1

  do while ( i < n )

    i = i + 1

    call s_to_r8 ( s(ilo:), rvec(i), ierror, lchar )

    if ( ierror /= 0 ) then
      ierror = -i
      exit
    end if

    ilo = ilo + lchar

  end do

  return
end
subroutine s_word_count ( s, nword )

!*****************************************************************************80
!
!! S_WORD_COUNT counts the number of "words" in a string.
!
!  Licensing:
!
!    This code is distributed under the MIT license. 
!
!  Modified:
!
!    14 April 1999
!
!  Author:
!
!    John Burkardt
!
!  Parameters:
!
!    Input, character ( len = * ) S, the string to be examined.
!
!    Output, integer NWORD, the number of "words" in the string.
!    Words are presumed to be separated by one or more blanks.
!
  implicit none

  logical blank
  integer i
  integer lens
  integer nword
  character ( len = * ) s

  nword = 0
  lens = len ( s )

  if ( lens <= 0 ) then
    return
  end if

  blank = .true.

  do i = 1, lens

    if ( s(i:i) == ' ' ) then
      blank = .true.
    else if ( blank ) then
      nword = nword + 1
      blank = .false.
    end if

  end do

  return
end
subroutine timestamp ( )

!*****************************************************************************80
!
!! TIMESTAMP prints the current YMDHMS date as a time stamp.
!
!  Example:
!
!    31 May 2001   9:45:54.872 AM
!
!  Licensing:
!
!    This code is distributed under the MIT license.
!
!  Modified:
!
!    18 May 2013
!
!  Author:
!
!    John Burkardt
!
!  Parameters:
!
!    None
!
  implicit none

  character ( len = 8 ) ampm
  integer d
  integer h
  integer m
  integer mm
  character ( len = 9 ), parameter, dimension(12) :: month = (/ &
    'January  ', 'February ', 'March    ', 'April    ', &
    'May      ', 'June     ', 'July     ', 'August   ', &
    'September', 'October  ', 'November ', 'December ' /)
  integer n
  integer s
  integer values(8)
  integer y

  call date_and_time ( values = values )

  y = values(1)
  m = values(2)
  d = values(3)
  h = values(5)
  n = values(6)
  s = values(7)
  mm = values(8)

  if ( h < 12 ) then
    ampm = 'AM'
  else if ( h == 12 ) then
    if ( n == 0 .and. s == 0 ) then
      ampm = 'Noon'
    else
      ampm = 'PM'
    end if
  else
    h = h - 12
    if ( h < 12 ) then
      ampm = 'PM'
    else if ( h == 12 ) then
      if ( n == 0 .and. s == 0 ) then
        ampm = 'Midnight'
      else
        ampm = 'AM'
      end if
    end if
  end if

  write ( *, '(i2,1x,a,1x,i4,2x,i2,a1,i2.2,a1,i2.2,a1,i3.3,1x,a)' ) &
    d, trim ( month(m) ), y, h, ':', n, ':', s, '.', mm, trim ( ampm )

  return
end
subroutine triangle_area_2d ( t, area )

!*****************************************************************************80
!
!! TRIANGLE_AREA_2D computes the area of a triangle in 2D.
!
!  Discussion:
!
!    If the triangle's vertices are given in counterclockwise order,
!    the area will be positive.  If the triangle's vertices are given
!    in clockwise order, the area will be negative!
!
!    An earlier version of this routine always returned the absolute
!    value of the computed area.  I am convinced now that that is
!    a less useful result!  For instance, by returning the signed
!    area of a triangle, it is possible to easily compute the area
!    of a nonconvex polygon as the sum of the (possibly negative)
!    areas of triangles formed by node 1 and successive pairs of vertices.
!
!  Licensing:
!
!    This code is distributed under the MIT license. 
!
!  Modified:
!
!    17 October 2005
!
!  Author:
!
!    John Burkardt
!
!  Parameters:
!
!    Input, real ( kind = rk ) T(2,3), the triangle vertices.
!
!    Output, real ( kind = rk ) AREA, the area of the triangle.
!
  implicit none

  integer, parameter :: rk = kind ( 1.0D+00 )

  integer, parameter :: dim_num = 2

  real ( kind = rk ) area
  real ( kind = rk ) t(dim_num,3)

  area = 0.5D+00 * ( &
      t(1,1) * ( t(2,2) - t(2,3) ) &
    + t(1,2) * ( t(2,3) - t(2,1) ) &
    + t(1,3) * ( t(2,1) - t(2,2) ) )

  return
end