SAMTEST
 25 November 1995
  
 MAXNX=   81
 MAXNY=   25
 MAXELM=  3840
 MAXEQN=  17803
 MAXNP=   7889
  
 Compare two problem solutions on different meshes.
  
 Enter filename for fine mesh data input:
 Fine mesh data is taken from u.81.dat                                
  
 Enter filename for coarse mesh data input:
 Coarse mesh data is taken from u.31.dat                                
 The refinement factor is     2.66667
  
 L2DIF:
  
 Area          =     4.1465657551819
  
 L2(U1-U2)/Area =     2.0339639795838D-04
 L2(V1-V2)/Area =     1.7138281443909D-04
 L2(P1-P2)/Area =     4.7662006051756D-03
  
 L2(U1)/Area =    0.18502246660868
 L2(V1)/Area =     1.2002389667064D-02
 L2(P1)/Area =    0.13021590954960
  
 L2(U2)/Area =    0.18502177753691
 L2(V2)/Area =     1.2035528842503D-02
 L2(P2)/Area =    0.13425446863935
  
 LL2DIF:
  
 Number of U and V nodes Np =   1159
 Number of P nodes Npp =   310
  
 l2(U1-U2)/Np  =     1.3607344387709D-05
 l2(V1-V2)/Np  =     1.1189550751671D-05
 l2(P1-P2)/Npp =     5.5490657100001D-04
  
 l2(U1)/Np     =     1.0760400667485D-02
 l2(V1)/Np     =     6.8713295532562D-04
 l2(P1)/Npp    =     1.5156503405692D-02
  
 l2(U2)/Np     =     1.0760428247758D-02
 l2(V2)/Np     =     6.8918321637404D-04
 l2(P2)/Npp    =     1.5618080815515D-02
  
 LLINFDIF:
  
 Number of U and V nodes Np =   1159
 Number of P nodes Npp =   310
  
 linf(U1-U2)  =     6.7484942000431D-03  116
 linf(V1-V2)  =     5.2325878093920D-03  116
 linf(P1-P2)  =     2.4234301562755D-02  115
  
 linf(U1)     =    0.58194627024973  256
 linf(V1)     =     9.9904769187258D-02  157
 linf(P1)     =    0.53643752075424  3
  
 linf(U2)     =    0.58212475511309  256
 linf(V2)     =     1.0128139488285D-01  157
 linf(P2)     =    0.55062820878041  115